Make your own rose from Beauty and the Beast

 

Recently, my niece and I saw the new live-action Beauty and the Beast. We, of course, loved it!! For her 10th birthday, I really wanted to get her a rose under a bell jar, like in the movie. I searched for some, but there are none being mass-produced or sold by any retailer. The only ones I found were on Etsy, and, while beautiful, they were a bit more expensive than I was hoping for. As usually happens when I discover things that are too expensive, I thought to myself “I could totally do that!” And, so can you!

 

 

Supplies

  • Large Cloche/Bell Jar with wood base – $15. I found mine at Michael’s. It was $30, but I had a half-off coupon from the Michael’s app
  • Small wood balls or spools to add some height to the jar – $3.16. I set the jar on a few different options before choosing my favorite. You’ll want something tall enough to hide the battery pack under the jar. The ones I found were 79 cents apiece.
  • Fake Rose – $5. Make sure it is a size that looks good under the jar. Michael’s had a gorgeous large fake rose, but it was too big. I ended up going with a slightly less gorgeous (but still pretty) one from JoAnn’s that fit better.
  • Fake Rose Petals – $1. Rather than buying another $5 fake flower to tear apart for petals, I picked up one from Dollar Tree. The flower itself wasn’t nice at all, but since I was just pulling petals off, it worked perfect! You can also find fake rose petals in the wedding section of most craft stores, but, again, why pay the extra money?
  • Battery-powered LED string lights – $0. These, I already owned. (I have a few of them actually.) Make sure you get the LED lights on a wire string so they are easy to bend – and, as LED’s, they will not get too hot. You can find these in craft stores, or on Amazon for cheap, like under $10. For a bit more, you can get them with a remote control too. 6 feet is plenty long enough for this purpose.
  • Floral Tape – $1.50. Just basic green floral tape
  • Wood stain, paint brush – $0. I used a dark stain that I had left over from a previous project, as the base of the jar was already stained, and the wood spools were unstained. I prefer a foam brush for applying stain.
  • Spray or brush-on polyurethane to finish the wood – $0. I already had a satin spray on-hand, but glossy is a good option too!

My Project Total: $25.66

Tools

  • Wire cutter to cut the fake rose down to size.
  • Latex Gloves. Stain is awful to try to get off your hands!
  • Super glue, or other fast-acting adhesive. This is for gluing the lights in place around the rose petals. I found super glue did discolor the fake rose a bit, but I’m not sure any glue would behave any differently. If you have other options, go for it. I’d avoid hot glue for this purpose, however, as the petals are very thin and you’ll burn yourself. As it was, I got my fingers stuck with the super glue a few times.
  • Acetone, or other solvent. To un-stick your fingers after using the super glue! And to remove stain from your hands/arms/face (depending on how aggressive you are with your staining!)
  • E6000 or wood glue. This is to attach the spools to the base. Neither are fast-acting adhesives, so be sure to give yourself some time for the glue to cure.
  • Hot glue gun. To glue the rose petals and lights in place on the base of the jar.
  • Handheld drill with drill bits. Best to have a few drill bits that are around the same size as the diameter of the fake rose. More below
  • Scissors to clean up the edges of the fake rose and petals.

Continue reading