Reviving that plain old knife block

WP_001213Ok, so maybe the appearance of your knife block isn’t the biggest concern you have. It wasn’t mine either. But, after renovating the kitchen, having that ugly lump of wood on my beautiful new countertops was just a bummer. I’ve been wanting to experiment with chalkboard paint, and decided this was the perfect way to try it out!

What you need

A wooden knife block. If you don’t have one already, every thrift shop in the country has a few on hand. Pick one that matches the knives you have – or pick knives to fit the block!
Primer
Chalkboard paint – preferably spray paint
Chalk

 

Instructions

First, thoroughly clean the knife block. If you have TSP, this is best, as it will remove any grease stains. Let it dry.

WP_001215If your knife block has a magnet in the back for extra knives (mine did), you should cover the magnet with masking or painter’s tape.

Coat the block with the primer. If you’re using a spray primer, I would put two to three coats on. If you’re brushing it on, one coat should be sufficient. Follow the instructions to ensure sufficient dry time.

 

WP_001218Once your primer is dry, spray on the chalkboard paint! I do recommend the spray just because knife blocks are such odd surfaces, with all the holes. The spray will just coat easier. But feel free to brush it on also.

With a spray, you’ll need to do 3-4 coats. It is always best to do very thin coats with the spray, as it can easily drip or run down the sides.

Let the paint dry completely. Remove the tape, if you used it. Decorate the sides with chalk, put the knives back in and voila! A fun update to your kitchen counter!

 

 

(Oh, and yes, I did write “Caution! Sharp!” on the knife block. I need reminders like those!)