I love Christmas decorations! So the first week of January is always sad for me – it’s when I have to take down the tree and the Christmas decorations. This year, I discovered an infinitely easier way to store Christmas lights.
Every year, we all have this same issue – all the Christmas lights are in a big tangled mess. It takes forever to untangle. And you know some don’t work, but you have to get them untangled to figure out which string is having the issues. Well, there is an easier way – and it’s cheap!
First, take a cardboard poster tube. It should be relatively stiff cardboard – a paper towel roll might work, but may also be too flimsy. A one and a half to two inch diameter poster tube is perfect. Note: for a 100-light string, you will need about a one-foot length of tube. Cut a 2-inch slice into each end of the tube. Slide the female end of the string (the side with the outlet holes) into the sliced opening. Tuck the end into the tube.
Start wrapping the light string around the tube. Keep the light bulbs sticking out away from the tube, rather than tucking them under the string. Continue wrapping around the tube, keeping the string pretty tight together.
When you’re done, tuck the female end of the string into the slice you cut on the other end of the tube. Repeat with all your lights. These tubes are easy to stick into a storage box and store until next year. And, even better, when you pull them out of storage next year, all you need to do is pull the plug out from the tube and plug it in to the wall to see if the lights are all still working. No untangling needed!